Aircraft Conceptual Design Training

Aircraft Conceptual Design Training


Aircraft Conceptual Design Training Course Description

This popular five-day aircraft design short Aircraft Conceptual Design Training has been attended by almost 3,000 people to date, and has been presented at Lockheed, Boeing, NASA Langley, Rockwell, British Aerospace, the Swedish Royal Institute of Technology (KTH), SAAB Aircraft, Linkoping University (Sweden), Samsung Aerospace, and the Chilean Aeronautical Academy (APA), as well as numerous public presentations through AIAA. Aimed at the working engineer in an industry or government aircraft design department, the course is also highly useful for those teaching aircraft design and offers a broad overview of the entire subject of Aircraft Conceptual Design in an integrated, cohesive, and enjoyable set of lectures. All required theoretical methods are covered in the course, but the biggest strength of the course is that it provides a “real-world” insight into the actual practice of aircraft design. Numerous interesting and informative examples are given including design failures!

Tour The course covers both the analytical and design layout skills required for the initial design of new aircraft concepts and emphasizes practical aircraft design including configuration layout development and design “rules-of-thumb” as well as the analytical tasks of design such as aerodynamic analysis and vehicle sizing. Special topics of interest include stealth design, VSTOL and helicopter design, design optimization and carpet plotting, and use of computers and CAD in conceptual design.

Aircraft Conceptual Design TrainingRelated Courses:

Duration:5 days

Skills Gained:

• Developing a design in response to requirements
• Laying out the design on a drafting table or CAD screen
• Analyzing it for aerodynamics, propulsion, structure, weights, stability, cost, and performance
• Calculation of range or sizing to a specified mission
• Trade Studies, carpet plots, and multivariable/multidisciplinary optimization, and……
• Learning from your work to make the next design version better!

Customize It:

With onsite Training, courses can be scheduled on a date that is convenient for you, and because they can be scheduled at your location, you don’t incur travel costs and students won’t be away from home. Onsite classes can also be tailored to meet your needs. You might shorten a 5-day class into a 3-day class, or combine portions of several related courses into a single course, or have the instructor vary the emphasis of topics depending on your staff’s and site’s requirements.

Course Content:


LECTURE 1: INTRODUCTION: Overview of the design process, requirements definition, end products of design.

LECTURE 2: QUICK DESIGN & SIZING TECHNIQUES: Methods to quickly determine aircraft weight and size required to meet mission requirements, rapid aero/weights/propulsion methods, design trade studies.

LECTURE 3: WING/TAIL GEOMETRY SELECTION: Selection of wing geometry and tail arrangement.

LECTURE 4: THRUST-TO-WEIGHT AND WING LOADING, INITIAL SIZING: Initial selection of wing loading and thrust-to-weight (or horsepower-to-weight) ratio to satisfy requirements such as stall speed, climb rate, and maneuverability. Refined estimation of aircraft takeoff weight and fuel weight to attain the design mission, and determination of the required fuselage, wing, and tail sizes.


LECTURE 5: CONFIGURATION LAYOUT AND LOFT: Design layout of a credible aircraft configuration arrangement including external geometry, conic lofting, flat-wrap development, smoothness verification, cross-section definition, and internal layout. Design layout of wings and tails including airfoil interpolation, trapezoidal and non-trapezoidal geometries, wing location guidelines.

LECTURE 6: AERO & STRUCTURES CONSIDERATIONS: Design guidance and rules-of-thumb for creation of configuration layouts with good aerodynamics and structural arrangement.

LECTURE 7: SPECIAL CONSIDERATIONS: Design impacts of observability (radar, IR, visual, and aural), vulnerability, producibility, and maintainability.

LECTURE 8: SYSTEMS INTEGRATION: Design integration of landing gear, hydraulics, electrics, pneumatics, and avionics.


LECTURE 9: PAYLOAD, PASSENGERS, & CREW: Design layout of the crew station, passenger compartment, cargo bays, and weapons integration.

LECTURE 10: PROPULSION INTEGRATION: Jet engine integration including engine selection, engine scaling, engine location considerations, inlet geometry and location, and nozzle geometry. Propeller engine integration including engine selection and location considerations, cowling geometry, and propeller sizing. Aircraft fuel system considerations.

LECTURE 11: AERODYNAMIC ANALYSIS: Methods for estimating the aerodynamic lift and drag from low subsonic through supersonic speeds. Methods discussed include the equivalent skin friction method, the component drag build up method, Oswald’s efficiency factor, the leading edge suction method, and the Sears-Haack wave drag method. Introduction to Computational Fluid Dynamics (CFD).

LECTURE 12: STABILITY AND CONTROL ANALYSIS: Methods for determining if the design satisfies essential stability and control requirements including trim, nosewheel liftoff, static stability, departure susceptibility, and spin recovery.


LECTURE 13: PROPULSION ANALYSIS: Methods for calculation of the installed net propulsive force for jet or propeller-driven aircraft, including installation corrections, inlet drag, nozzle drag, and propeller thrust calculation.

LECTURE 14: LOADS, STRUCTURES AND WEIGHTS: Aircraft loads, aerospace materials and properties. Introduction to the Finite Element Method (FEM). Estimation of aircraft weights and mass moments using statistical models and corrections for advanced materials.

LECTURE 15: PERFORMANCE ANALYSIS: Performance analysis methods for level flight, climb, glide, takeoff, landing, and maneuver. Energy maneuverability methods for combat analysis and minimum time/fuel to climb. Fighter measures of merit including agility and post-stall maneuver.

LECTURE 16: TRADE STUDIES AND COST ANALYSIS: Refined sizing techniques and discussion of industry methods. Sizing matrix and carpet plot optimization techniques. Use of performance constraint curves to determine the optimal aircraft. Life Cycle Cost analysis using statistical and operational data. Airline economic analysis.


LECTURE 17: COMPUTER-AIDED CONCEPTUAL DESIGN: Use of CAD in the conceptual design environment. Overview of computer graphics methods and mathematics for aircraft design. Demonstration of conceptual design CAD and integrated analysis and optimization (RDS-Professional).

LECTURE 18: VTOL, HELICOPTER, AND DERIVATIVE AIRCRAFT DESIGN: Overview of jet VSTOL design and analysis including concepts and integration issues. Helicopter aerodynamics, performance, controls, design, and sizing techniques. Design considerations for development of derivatives of existing aircraft, including performance, weight, and cost estimation.

LECTURE 19: INNOVATIVE DESIGN CONCEPTS: Overview of innovative design concepts including Canard, Flying Wing, Joined-Wing, Blended Wing Body, UAV, Asymmetric, Hypersonic, etc.

LECTURE 20: DESIGN EXAMPLES: Review of prior lessons by a step-by-step design examples from initial requirements and first sketch to completed configuration layout and optimization carpet plot, including a This class can optionally be taught as a two-week intensive in-house course with substantial student participation including seminar discussions and an in-class project in aircraft conceptual design.

Whether you are looking for general information or have a specific question, we want to help

Request More Information

    Time Frame: 0-3 Months4-12 Months

    Print Friendly, PDF & Email